{"title":"Beam Saw \u0026 Panel Sizing Blades","description":"\u003c!-- ============================================================\n     COLLECTION: Beam saw blades  (handle: horizontal-panel-saw)  — v2\n     Paste into Shopify \u003e Collections \u003e Description (rich text \u003e \"Show HTML\" \u003c\u003e)\n     Spine: every main sizing blade has a 1:1 matched scoring blade.\n     LORNA hero \/ Popular Tools (PS + NPS) value alternate.\n     Sentence case. Generic head terms kept on this flagship page.\n     ============================================================ --\u003e\n\n\u003cp\u003eBeam saws — also called horizontal panel saws or panel sizing saws — cut stacks of sheet goods to finished size in a single pass. They never run one blade alone: a large \u003cstrong\u003emain sizing blade\u003c\/strong\u003e makes the cut while a smaller \u003cstrong\u003escoring blade\u003c\/strong\u003e runs just ahead of it, pre-cutting the underside of the panel so melamine, laminate, and veneer break out clean instead of chipping. That pairing is the whole job of the machine — and it's how this collection is built.\u003c\/p\u003e\n\n\u003ch2\u003eEvery sizing blade has a matched scoring blade\u003c\/h2\u003e\n\u003cp\u003eOn a beam saw the main blade and the scorer only work as a set. The scoring blade's kerf has to be matched to the main blade's kerf, and its diameter, bore, and projection have to suit your saw's scoring spindle. Get that pairing right and the top face of the panel is fully supported and chip-free; get it wrong and you'll chase chip-out no matter how good the main blade is.\u003c\/p\u003e\n\u003cp\u003eSo for every main sizing blade we stock, there is a specific scoring blade that is its correct partner — a true 1:1 match, not a \"close enough\" substitute. \u003cstrong\u003eTell us your machine, or the main blade you run, and we'll give you the exact matched scorer.\u003c\/strong\u003e No guessing on kerf, no mismatched projection, no wasted panels.\u003c\/p\u003e\n\n\u003ch2\u003eThe recommended choice: LORNA Industrial\u003c\/h2\u003e\n\u003cp\u003eEvery blade here is built for production beam saws, and our German-made \u003cstrong\u003eLORNA Industrial\u003c\/strong\u003e line is the one we put first. LORNA plates are precision-ground from high-grade tool steel and tensioned for stability at production feed rates, then tipped with fine-grain micrograin carbide that holds a sharp edge far longer between sharpenings. The triple-chip (TCG) grind on the sizing blades is purpose-made for melamine, MDF, particleboard, and double-sided laminate — it shears the brittle surface instead of tearing it.\u003c\/p\u003e\n\u003cp\u003eLORNA \u003cstrong\u003eHPS\u003c\/strong\u003e main sizing blades and LORNA \u003cstrong\u003eCSA\u003c\/strong\u003e scoring blades are ground to original bore, pin-hole, and projection specs, so the pair drops straight into your saw. Because they hold their edge and resharpen well, the number that actually matters — \u003ca href=\"https:\/\/carbidesawblade.com\/blogs\/sawingtips\/cost-per-cut-saw-blade\"\u003ecost per cut\u003c\/a\u003e — comes out lower than a cheap blade that dulls fast and chips panels.\u003c\/p\u003e\n\n\u003ch2\u003eThe value alternate: Popular Tools\u003c\/h2\u003e\n\u003cp\u003eWhen you want a proven workhorse at a lower entry price, our \u003cstrong\u003ePopular Tools\u003c\/strong\u003e line (made in Taiwan) covers the same sizes. \u003cstrong\u003ePS\u003c\/strong\u003e and \u003cstrong\u003eNPS\u003c\/strong\u003e main sizing blades pair with \u003cstrong\u003eSC\u003c\/strong\u003e scoring blades for a complete set at a sharper price — a smart pick when the budget is tighter or you're stocking a spare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on NPS:\u003c\/strong\u003e the NPS series is its own line of sizing blades, with its own diameters, bores, and tooth specs — it is \u003cem\u003enot\u003c\/em\u003e a substitute for a PS blade. If your machine runs an NPS-series blade, order it by its NPS number; it's a distinct item with its own matched scorer. (Searching an NPS part number? You'll find the exact NPS blade here, not just the nearest PS.)\u003c\/p\u003e\n\n\u003ch2\u003eMade to fit the leading beam saws\u003c\/h2\u003e\n\u003cp\u003eOur sizing and scoring sets are made to fit the machines that run the cabinet, casework, and furniture shop floor, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolzma\u003c\/strong\u003e (HPP, HPL series)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchelling\u003c\/strong\u003e (fh, fk series)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGiben\u003c\/strong\u003e (Prisma, G series)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSCM \/ Gabbiani\u003c\/strong\u003e (Sigma, Galaxy)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBiesse \/ Selco\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHomag\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCantek\u003c\/strong\u003e and other production panel-sizing machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMain sizing blades run common beam-saw bores from 30mm up to 75mm with the matching drive-pin patterns; scoring blades cover the conical and two-piece adjustable styles these saws use. Not sure of your bore, pin pattern, or scoring kerf? Our \u003ca href=\"https:\/\/carbidesawblade.com\/pages\/blade-finder\"\u003eblade finder\u003c\/a\u003e or a quick call will land you on the right pair.\u003c\/p\u003e\n\n\u003ch2\u003eHow to choose the set\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMain sizing blade\u003c\/strong\u003e — match diameter, bore, tooth count, and pin-hole pattern to your saw. A high tooth count with a TCG grind gives the cleanest cut in coated panels and MDF; a lower count clears chips faster in thick stacks of raw board.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMatched scoring blade\u003c\/strong\u003e — choose a one-piece conical scorer or an adjustable two-piece split scorer, sized so the scoring kerf sits just wider than the main blade's kerf. Need adjustable split scorers specifically? See our \u003ca href=\"https:\/\/carbidesawblade.com\/collections\/split-scoring-sets\"\u003esplit scoring sets\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt to be resharpened\u003c\/h2\u003e\n\u003cp\u003eThese are industrial blades meant to earn their keep over thousands of cuts. The carbide is generous enough to be resharpened repeatedly, keeping cost per cut low across the life of the blade. (Sharpening is arranged through our service partners — ask and we'll route it.)\u003c\/p\u003e\n\n\u003cp\u003eBrowse the sizing and scoring blades below, or call \u003ca href=\"tel:+18556287297\"\u003e(855) 628-7297\u003c\/a\u003e or email \u003ca href=\"mailto:info@carbidesawblade.com\"\u003einfo@carbidesawblade.com\u003c\/a\u003e and we'll match the exact main-and-scorer pair to your beam saw.\u003c\/p\u003e\n\n\u003cp style=\"font-size:0.85em;color:#555;margin-top:1.5em;\"\u003e\u003cem\u003eLORNA Industrial and Popular Tools blades are aftermarket replacements made to fit the machines named above. Holzma, Schelling, Giben, SCM, Gabbiani, Biesse, Selco, Homag, and Cantek are trademarks of their respective owners. We are not affiliated with, sponsored by, or endorsed by any of these manufacturers; brand names are used only to indicate machine fitment.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"350-d-x-72t-x-tcg-x-80-bore-selco-panel-saw-blade","title":"350mm D x 72 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits SCM \/ Gabbiani (PS3508072T)","description":"\u003cp\u003eThe \u003cstrong\u003e350mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3508072T) is built for clean, chip-free sizing of MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 4\/9\/100 + 2\/7\/110 + 2\/14\/110 pin pattern and a 15° hook to fit SCM \/ Gabbiani panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSCM, Gabbiani are trademarks of their respective owners. Aftermarket blade made to fit, not affiliated with the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":41115215560843,"sku":"PS3508072T","price":228.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/panelsawblade_14f5b69f-c2c5-4502-b66e-27ed86702f60.jpg?v=1692303025"},{"product_id":"350mm-d-x-72t-x-tcg-x-65-bore-selco-wn-250-panel-saw-blade","title":"380mm LORNA Holzma Panel Saw Blade – 72T TCG, 60mm Bore (HPS380072060048)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm\/400mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS380072060048) is a Made-in-Germany LORNA Industrial blade engineered for tight-tolerance, chip-free sizing on the 380 Holzma (Homag) panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.2mm plate deliver accurate, splinter-free edges in MDF, particleboard, laminate, melamine, and plywood.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm arbor with the 2\/14\/100 pinhole pattern specific to Holzma, plus a 15° hook for clean feed on horizontal beam saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma and Homag are trademarks of their respective owners. Aftermarket blade made to fit, not affiliated with the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537695645835,"sku":"HPS380072060048","price":200.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/HPS_380_072_060_048_85dc92bb-8290-48a0-8734-38f63accdf07.jpg?v=1777563340"},{"product_id":"450mm-d-x-72t-x-tcg-x-60-bore-holzma-panel-saw-blade","title":"450mm LORNA Holzma Panel Saw Blade – 72T TCG, 60mm Bore (HPS450072060048)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS450072060048) is a Made-in-Germany LORNA Industrial blade engineered for tight-tolerance, chip-free sizing on the 450 Holzma (Homag) panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.6mm plate deliver accurate, splinter-free edges in MDF, particleboard, laminate, melamine, and plywood, run after run.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm arbor with the 2\/14\/125 pinhole pattern specific to Holzma, plus a 15° hook for clean feed on horizontal beam saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma and Homag are trademarks of their respective owners. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537773600907,"sku":"HPS450072060048","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/panelsawblade_c97cefdc-64dd-4cf3-a1f5-74e087609adb.jpg?v=1692208538"},{"product_id":"450mm-d-x-72t-x-tcg-x-80-bore-selco-panel-saw-blade","title":"450mm LORNA Selco Panel Saw Blade – 72T TCG, 80mm Bore (HPS450072080044)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS450072080044) is a Made-in-Germany LORNA Industrial blade engineered for tight-tolerance, chip-free sizing on the 450 Selco panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.2mm plate deliver accurate, splinter-free edges in MDF, particleboard, laminate, melamine, and plywood, run after run.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm arbor with the 2\/9\/130 + 4\/19\/120 pinhole pattern specific to Selco, plus a 15° hook for clean feed on horizontal beam saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSelco is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537774649483,"sku":"HPS450072080044","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/panelsawblade_3bf55a10-4615-4ee0-bc33-4510d000af0d.jpg?v=1692208685"},{"product_id":"350mm-d-x-72t-x-tcg-x-1-1-4-bore-scmi-panel-saw-blade","title":"370mm x 72T TCG Panel Saw Blade – 30mm Bore for Schelling (Made in Germany)","description":"\u003cp\u003e\u003cstrong\u003e370mm Panel Saw Blade for Schelling – Made in Germany\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOur premium 370mm saw blade is precision-engineered in Germany for use with Schelling panel saws. Featuring a 30mm bore and pinhole pattern 2\/10\/60, it delivers clean, chip-free cuts on demanding panel materials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 370mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 72\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e 4.4mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate Thickness:\u003c\/strong\u003e 3.0mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrind:\u003c\/strong\u003e Triple Chip Grind (TCG)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePinholes:\u003c\/strong\u003e 2\/10\/60 – Specific to Schelling saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNeed a scoring blade to complete your setup? \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/carbidesawblade.com\/products\/200mm-d-x-34t-x-30mm-bore-gabbiani-scoring-blade\" target=\"_blank\" title=\"Shop matching scoring blade for 370mm Schelling panel saw blade\"\u003eClick here for the perfect match\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNavy Industrial offers a full line of Schelling-compatible saw blades manufactured to the highest standards. Backed by German engineering and bulk inventory, we provide reliable performance and competitive pricing for professional shops.\u003c\/p\u003e\n","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537775894667,"sku":"HPS370072030044","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/HPS_370_070_030_044.png?v=1747165979"},{"product_id":"400mm-d-x-72t-x-tcg-x-80-bore-gabbiani-panel-saw-blade","title":"400mm LORNA Gabbiani Panel Saw Blade – 72T TCG, 80mm Bore (HPS400072080044)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm\/400mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS400072080044) is a Made-in-Germany LORNA Industrial blade engineered for tight-tolerance, chip-free sizing on the 400 Gabbiani panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.2mm plate deliver accurate, splinter-free edges in MDF, particleboard, laminate, melamine, and plywood.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm arbor with the 2\/9\/130 + 4\/19\/120 pinhole pattern specific to Gabbiani, plus a 15° hook for clean feed on horizontal beam saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGabbiani is a trademark of its respective owner. Aftermarket blade made to fit, not affiliated with the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537782612107,"sku":"HPS400072080044","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/panelsawblade_79a8c0eb-2845-467d-90a1-f8c249d49f12.jpg?v=1692209681"},{"product_id":"400mm-d-x-72t-x-tcg-x-30-bore-schelling-panel-saw-blade","title":"400mm LORNA Schelling Panel Saw Blade – 72T TCG, 30mm Bore (HPS400072030044)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm\/400mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS400072030044) is a Made-in-Germany LORNA Industrial blade engineered for tight-tolerance, chip-free sizing on the 400 Schelling panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.2mm plate deliver accurate, splinter-free edges in MDF, particleboard, laminate, melamine, and plywood.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm arbor with the  pinhole pattern specific to Schelling, plus a 15° hook for clean feed on horizontal beam saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSchelling is a trademark of its respective owner. Aftermarket blade made to fit, not affiliated with the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537784938635,"sku":"HPS400072030044","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/HPS_400_072_030_044.png?v=1747167792"},{"product_id":"3500mm-d-x-72t-x-tcg-x-75-bore-giben-panel-saw-blade","title":"355mm x 72T TCG Panel Saw Blade – 75mm Bore for Giben Machines (Made in Germany)","description":"\u003cp\u003e\u003cstrong\u003ePremium 355mm Panel Saw Blade – Designed for Giben Machines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing our exclusive, Made in Germany 355mm saw blade, engineered for precision and reliability on Giben panel saws. Built with a large 75mm arbor bore and no pinholes, this blade is ideal for high-output cutting environments requiring tight tolerances and smooth finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 355mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore:\u003c\/strong\u003e 75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e 4.4mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Thickness:\u003c\/strong\u003e 3.0mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrind:\u003c\/strong\u003e Triple Chip Grind (TCG)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePinholes:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLooking for a scoring blade to match? \u003ca href=\"https:\/\/carbidesawblade.com\/products\/125mm-d-x-24t-x-45mm-bore-giben-scoring-blade\" title=\"Matching scoring blade for 355mm Giben panel saw blade\"\u003eClick here\u003c\/a\u003e for the perfect companion blade.\u003c\/p\u003e\n\u003cp\u003eNavy Industrial offers a wide selection of panel saw blades specifically designed for Giben machines. Our German-manufactured blades deliver exceptional cut quality across a variety of panel materials. With bulk inventory and competitive pricing, Navy Industrial is your trusted source for precision panel cutting.\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41537786839179,"sku":"HPS355072075044","price":172.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/HPS_355_072_075_044.png?v=1747164779"},{"product_id":"200mm-d-x-34t-x-45-bore-holzma-scoring-blade","title":"200MM D x 34T x 45 Bore HOLZMA Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 200mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e380 and 450 models Holzma (Homag) panel saw\u003c\/strong\u003e. With a 45mm arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 380 or 450 model Holzma panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e200MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e34 TEETH\u003c\/li\u003e\n\u003cli\u003e45MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.8-5.8 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.6MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNO PINHOLES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your Holzma panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538610790539,"sku":"CSA200034045048","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700.jpg?v=1692286360"},{"product_id":"200mm-d-x-34t-x-65-bore-selco-scoring-blade","title":"200MM D x 34T x 65 Bore SELCO Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 200mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e450 model SELCO panel saw\u003c\/strong\u003e. With a 45mm arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 450 model SELCO panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e200MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e34 TEETH\u003c\/li\u003e\n\u003cli\u003e65MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.2MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNO PINHOLES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your SELCO panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538620620939,"sku":"CSA200034065048","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700_e06c116e-0137-4763-b0f2-f58ce57a2314.jpg?v=1692287257"},{"product_id":"150mm-d-x-24t-x-1-1-4-bore-scmi-scoring-blade","title":"150MM D x 24T x 1-1\/4\" Bore SCMI Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 150mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e350 model SCMI panel saw\u003c\/strong\u003e. With a 1-1\/4\" arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 350 model SCMI panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e150MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e24 TEETH\u003c\/li\u003e\n\u003cli\u003e1-1\/4\"ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.0MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNO PINHOLES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your SCMI panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538626879627,"sku":"CSA150024114044","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700_4e25eba7-6c90-421d-9aee-cc00882b53da.jpg?v=1692287395"},{"product_id":"160mm-d-x-36t-x-55mm-bore-gabbiani-scoring-blade","title":"160MM D x 36T x 55 Bore Gabbiani Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 160mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e400\u003c\/strong\u003e \u003cstrong\u003emodel Gabbiani panel saw\u003c\/strong\u003e. With a 55mm arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 400-model SCMI panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e160MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e36 TEETH\u003c\/li\u003e\n\u003cli\u003e155MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.2MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003ePINHOLES: 3\/7\/66 - Perfect match for Gabbiani\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your Gabbiani panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538638184587,"sku":"CSA160036055044","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700_5b23a575-f718-42b1-8928-9cc86817d25c.jpg?v=1692287615"},{"product_id":"200mm-d-x-34t-x-30mm-bore-gabbiani-scoring-blade","title":"200MM D x 34T x 20 Bore Schelling Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 200mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e370\u003c\/strong\u003e \u003cstrong\u003emodel Schelling panel saw\u003c\/strong\u003e. With a 20mm arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 370-model Schelling panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e200MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e34 TEETH\u003c\/li\u003e\n\u003cli\u003e20MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.2MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNO PINHOLES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your Schelling panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538645262475,"sku":"CSA200034020044","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700_f7349807-895a-4ed3-9b69-601dd45b93a9.jpg?v=1692287816"},{"product_id":"125mm-d-x-24t-x-45mm-bore-giben-scoring-blade","title":"125MM D x 24T x 45 Bore Giben Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003eIntroducing our exclusive, Made in Germany, 125mm saw blade, crafted to seamlessly fit the \u003cstrong\u003e355\u003c\/strong\u003e \u003cstrong\u003emodel Giben panel saw\u003c\/strong\u003e. With a 20mm arbor hole and precisely aligned pinholes, this panel saw blade is tailor-made for your 355-model Giben panel saw.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e125MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e24 TEETH\u003c\/li\u003e\n\u003cli\u003e45MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.2MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNO PINHOLES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're in search of top-notch conical scoring saw blades to enhance the performance of your Giben panel saw, Navy Industrial has got you covered. Our range of panel saw sets is unparalleled in both quality and affordability, boasting first-rate industrial blades that fit your saw impeccably. Our blades are thoughtfully crafted with the appropriate pinhole configuration to guarantee precise and chip-free cuts on a variety of panel materials. Additionally, our innovative manufacturing process enables us to slice through even the most robust materials with ease. What's more, our extensive inventory and bulk purchasing ability allows us to offer competitive pricing that is unbeatable. For all your panel saw blade requirements, Navy Industrial is the name to trust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":41538648113291,"sku":"CSA125024045044","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/CSA_125_copy.jpg?v=1777495300"},{"product_id":"180mm-d-x-36t-x-55-bore-holzma-homag-scoring-blade","title":"180MM D x 30T x 45 Bore Holzma\/Homag Scoring Blade","description":"\u003cdiv\u003e\n\u003cdiv\u003e180mm saw blade, crafted to seamlessly fit the \u003cb\u003eHolma \u0026amp; Homag machines\u003c\/b\u003e.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e180MM DIAMETER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e30 TEETH\u003c\/li\u003e\n\u003cli\u003e45MM ARBOR HOLE\u003c\/li\u003e\n\u003cli\u003e4.4-5.4 KERF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.2MM PLATE THICKNESS\u003c\/li\u003e\n\u003cli\u003eNo pinholes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":42747579302027,"sku":"CS1805536","price":164.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/Conicalscorersmall-700x700_5b23a575-f718-42b1-8928-9cc86817d25c.jpg?v=1692287615"},{"product_id":"products-350mm-scmi-panel-saw-blade-72t-tcg-1-1-4-bore","title":"350mm D x 72 Teeth x TCG x 1-1\/4 inch Bore Panel Saw Blade – Fits SCMI (HPS 350 072 114 044)","description":"\u003cp\u003eThe \u003cstrong\u003e350mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (HPS 350 072 114 044) is a Made-in-Germany LORNA Industrial blade engineered for the SCMI sliding panel saw. Its 72 triple-chip (TCG) teeth and precision-ground 3.0mm plate deliver chip-free edges in MDF, particleboard, laminate, melamine, and plywood.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 1-1\/4 inch bore with the 4\/9\/100 pinhole pattern, plus a 15° hook for clean feed. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. German-engineered carbide tips resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSCMI is a trademark of its respective owner. Aftermarket blade made to fit, not affiliated with the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"LORNA Industrial","offers":[{"title":"Default Title","offer_id":43471951855755,"sku":"HPS 350 072 114 044","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/HPS350072114044_clipped_rev_2.png?v=1746811169"},{"product_id":"400mm-panel-saw-blade-72t-x-tcg-x-75-bore-carbide-saw-blade","title":"400mm D x 72 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Various (PS4007572T)","description":"\u003cp\u003eThe \u003cstrong\u003e400mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4007572T) is built for clean, chip-free sizing of MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 2\/7\/110 pin pattern and a 15° hook to fit horizontal beam panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":46928690512011,"sku":"PS4007572T","price":292.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/panelsawblade_79a8c0eb-2845-467d-90a1-f8c249d49f12.jpg?v=1692209681"},{"product_id":"popular-tools-ps6006060t-600mm-60t-tcg-panel-saw-blade","title":"600mm D x 60 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS6006060T)","description":"\u003cp\u003eThe \u003cstrong\u003e600mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS6006060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.8mm kerf on a 4.0mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook to fit Holzma beam saws and other 600mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47167488557195,"sku":"PS6006060T","price":577.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps6006072t-600mm-72t-tcg-panel-saw-blade","title":"600mm D x 72 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS6006072T)","description":"\u003cp\u003eThe \u003cstrong\u003e600mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS6006072T) delivers an even finer finish on coated panels — MDF, particleboard, laminate, melamine, and plywood. The higher 72-tooth count in SuperMicro-Sheen C-11 sub-micron carbide leaves cleaner edges on delicate surfaces, while the 5.8mm kerf on a 4.0mm plate holds a true line at full feed.\u003c\/p\u003e\n\u003cp\u003eIt runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook for Holzma beam saws and comparable 600mm panel saws. A different bore or pin pattern can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. The carbide tips resharpen repeatedly to keep cost-per-cut low across the blade’s service life.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47167488589963,"sku":"PS6006072T","price":618.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5206060t-520mm-60t-tcg-panel-saw-blade","title":"520mm D x 60 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS5206060T)","description":"\u003cp\u003eThe \u003cstrong\u003e520mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5206060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook to fit Holzma beam saws and other 520mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168039092363,"sku":"PS5206060T","price":362.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5303060t-530mm-60t-tcg-panel-saw-blade","title":"530mm D x 60 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS5303060T)","description":"\u003cp\u003eThe \u003cstrong\u003e530mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5303060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.0mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore and a 15° hook to fit Schelling beam saws and other 530mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSchelling is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168039223435,"sku":"PS5303060T","price":382.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5406060t-540mm-60t-tcg-panel-saw-blade","title":"540mm D x 60 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS5406060T)","description":"\u003cp\u003eThe \u003cstrong\u003e540mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5406060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.0mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook to fit Holzma beam saws and other 540mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168039256203,"sku":"PS5406060T","price":409.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5406084t-540mm-84t-tcg-panel-saw-blade","title":"540mm D x 84 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS5406084T)","description":"\u003cp\u003eThe \u003cstrong\u003e540mm 84-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5406084T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 84 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.0mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook to fit Holzma beam saws and other 540mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168039288971,"sku":"PS5406084T","price":456.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5501072tg-550mm-72t-tcg-panel-saw-blade","title":"550mm D x 72 Teeth x TCG x 100mm Bore Panel Saw Blade – Fits Giben (PS5501072TG)","description":"\u003cp\u003eThe \u003cstrong\u003e550mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5501072TG) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.0mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 100mm bore and a 15° hook to fit Giben beam saws and other 550mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGiben is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168045809803,"sku":"PS5501072TG","price":423.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps5706060t-570mm-60t-tcg-panel-saw-blade","title":"570mm D x 60 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS5706060T)","description":"\u003cp\u003eThe \u003cstrong\u003e570mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS5706060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 5.0mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 + 2\/19\/120 pin pattern and a 15° hook to fit Holzma beam saws and other 570mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47168045908107,"sku":"PS5706060T","price":431.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4206072t-420mm-72t-tcg-panel-saw-blade","title":"420mm D x 72 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS4206072T)","description":"\u003cp\u003eThe \u003cstrong\u003e420mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4206072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.4mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 pin pattern and a 15° hook to fit Holzma beam saws and other 420mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185663099019,"sku":"PS4206072T","price":341.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4307560t-430mm-60t-tcg-panel-saw-blade","title":"430mm D x 60 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Giben (PS4307560T)","description":"\u003cp\u003eThe \u003cstrong\u003e430mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4307560T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 4\/15\/105 pin pattern and a 15° hook to fit Giben beam saws and other 430mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185679351947,"sku":"PS4307560T","price":341.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4307572t-430mm-72t-tcg-panel-saw-blade","title":"430mm D x 72 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Giben (PS4307572T)","description":"\u003cp\u003eThe \u003cstrong\u003e430mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4307572T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 4\/15\/105 pin pattern and a 15° hook to fit Giben beam saws and other 430mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185679450251,"sku":"PS4307572T","price":341.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4308072a-430mm-72t-atb-panel-saw-blade","title":"430mm D x 72 Teeth x ATB x 80mm Bore Panel Saw Blade – Fits Selco (PS4308072A)","description":"\u003cp\u003eThe \u003cstrong\u003e430mm 72-tooth ATB panel sizing blade\u003c\/strong\u003e (PS4308072A) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 alternate-top-bevel (ATB) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco beam saws and other 430mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185679548555,"sku":"PS4308072A","price":307.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4308072t-430mm-72t-tcg-panel-saw-blade","title":"430mm D x 72 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits Selco (PS4308072T)","description":"\u003cp\u003eThe \u003cstrong\u003e430mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4308072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco beam saws and other 430mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185680793739,"sku":"PS4308072T","price":307.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4503072t-450mm-72t-tcg-panel-saw-blade","title":"450mm D x 72 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS4503072T)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4503072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore and a 15° hook to fit Schelling beam saws and other 450mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185681318027,"sku":"PS4503072T","price":341.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4603072t-460mm-72t-tcg-panel-saw-blade","title":"460mm D x 72 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Holzma (PS4603072T)","description":"\u003cp\u003eThe \u003cstrong\u003e460mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4603072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore with a 2\/13\/94 pin pattern and a 15° hook to fit Holzma beam saws and other 460mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185681776779,"sku":"PS4603072T","price":328.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4707560t-470mm-60t-tcg-panel-saw-blade","title":"470mm D x 60 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Giben (PS4707560T)","description":"\u003cp\u003eThe \u003cstrong\u003e470mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4707560T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 4\/15\/105 pin pattern and a 15° hook to fit Giben beam saws and other 470mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185682006155,"sku":"PS4707560T","price":273.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4707572t-470mm-72t-tcg-panel-saw-blade","title":"470mm D x 72 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Giben (PS4707572T)","description":"\u003cp\u003eThe \u003cstrong\u003e470mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4707572T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 4\/15\/105 pin pattern and a 15° hook to fit Giben beam saws and other 470mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185682137227,"sku":"PS4707572T","price":336.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4803060t-480mm-60t-tcg-panel-saw-blade","title":"480mm D x 60 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS4803060T)","description":"\u003cp\u003eThe \u003cstrong\u003e480mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4803060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore and a 15° hook to fit Schelling beam saws and other 480mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185682268299,"sku":"PS4803060T","price":307.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4803072t-480mm-72t-tcg-panel-saw-blade","title":"480mm D x 72 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS4803072T)","description":"\u003cp\u003eThe \u003cstrong\u003e480mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4803072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore and a 15° hook to fit Schelling beam saws and other 480mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185682301067,"sku":"PS4803072T","price":328.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"popular-tools-ps4808072t-480mm-72t-tcg-panel-saw-blade","title":"480mm D x 72 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits Selco (PS4808072T)","description":"\u003cp\u003eThe \u003cstrong\u003e480mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4808072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco beam saws and other 480mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFalse is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47185682333835,"sku":"PS4808072T","price":328.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"450mm-holzma-panel-saw-blade-72t-60mm-bore","title":"450mm D x 72 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS4506072T)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4506072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/14\/125 pin pattern and a 15° hook to fit Holzma beam saws and other 450mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47186282381451,"sku":"PS4506072T","price":356.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"450mm-selco-gabbiani-panel-saw-blade-72t-80mm-bore-tcg","title":"450mm D x 72 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits Selco \/ Gabbiani (PS4508072T)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4508072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco \/ Gabbiani beam saws and other 450mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSelco \/ Gabbiani are trademarks of their respective owners. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47186282479755,"sku":"PS4508072T","price":307.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"450mm-selco-gabbiani-panel-saw-blade-72t-80mm-bore-atb","title":"450mm D x 72 Teeth x ATB x 80mm Bore Panel Saw Blade – Fits Selco \/ Gabbiani (PS4508072A)","description":"\u003cp\u003eThe \u003cstrong\u003e450mm 72-tooth ATB panel sizing blade\u003c\/strong\u003e (PS4508072A) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 alternate-top-bevel (ATB) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long production runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco \/ Gabbiani beam saws and other 450mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times over the blade’s life to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSelco \/ Gabbiani are trademarks of their respective owners. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47186282545291,"sku":"PS4508072A","price":307.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"370mm-schelling-panel-saw-blade-72t-30mm-bore","title":"370mm D x 72 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS3703072T)","description":"\u003cp\u003eThe \u003cstrong\u003e370mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3703072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore with a 2\/10\/60 pin pattern and a 15° hook to fit Schelling beam saws and other 370mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSchelling is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188362821771,"sku":"PS3703072T","price":279.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-holzma-panel-saw-blade-60t-60mm-bore","title":"380mm D x 60 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS3806060T)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3806060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/14\/100 pin pattern and a 15° hook to fit Holzma beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188362952843,"sku":"PS3806060T","price":275.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-schelling-panel-saw-blade-72t-30mm-bore","title":"380mm D x 72 Teeth x TCG x 30mm Bore Panel Saw Blade – Fits Schelling (PS3803072T)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3803072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 30mm bore with a 2\/14\/100 pin pattern and a 15° hook to fit Schelling beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSchelling is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363018379,"sku":"PS3803072T","price":290.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-giben-panel-saw-blade-72t-50mm-bore","title":"380mm D x 72 Teeth x TCG x 50mm Bore Panel Saw Blade – Fits Giben (PS3805072T)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3805072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 50mm bore with a 4\/12.5\/80 pin pattern and a 15° hook to fit Giben beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGiben is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363149451,"sku":"PS3805072T","price":279.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-holzma-panel-saw-blade-72t-60mm-bore-4-8mm","title":"380mm D x 72 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS3806072TB)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3806072TB) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.8mm kerf on a 3.5mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/14\/100 pin pattern and a 15° hook to fit Holzma beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363214987,"sku":"PS3806072TB","price":302.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-selco-panel-saw-blade-72t-65mm-bore","title":"380mm D x 72 Teeth x TCG x 65mm Bore Panel Saw Blade – Fits Selco (PS3806572T)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3806572T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 65mm bore with a 2\/9\/110 pin pattern and a 15° hook to fit Selco beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSelco is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363313291,"sku":"PS3806572T","price":271.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"380mm-gabbiani-panel-saw-blade-72t-80mm-bore","title":"380mm D x 72 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits Gabbiani (PS3808072T)","description":"\u003cp\u003eThe \u003cstrong\u003e380mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS3808072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/14\/110 pin pattern and a 15° hook to fit Gabbiani beam saws and other 380mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGabbiani is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363378827,"sku":"PS3808072T","price":279.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"400mm-giben-panel-saw-blade-60t-75mm-bore","title":"400mm D x 60 Teeth x TCG x 75mm Bore Panel Saw Blade – Fits Giben \/ Homag (PS4007560T)","description":"\u003cp\u003eThe \u003cstrong\u003e400mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4007560T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 75mm bore with a 4\/15\/105 pin pattern and a 15° hook to fit Giben \/ Homag beam saws and other 400mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGiben, Homag are trademarks of their respective owners. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363706507,"sku":"PS4007560T","price":282.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"400mm-selco-panel-saw-blade-60t-80mm-bore","title":"400mm D x 60 Teeth x TCG x 80mm Bore Panel Saw Blade – Fits Selco (PS4008060T)","description":"\u003cp\u003eThe \u003cstrong\u003e400mm 60-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4008060T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 60 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 80mm bore with a 2\/9\/130 + 4\/19\/120 pin pattern and a 15° hook to fit Selco beam saws and other 400mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSelco is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363804811,"sku":"PS4008060T","price":296.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"},{"product_id":"400mm-holzma-panel-saw-blade-72t-60mm-bore","title":"400mm D x 72 Teeth x TCG x 60mm Bore Panel Saw Blade – Fits Holzma (PS4006072T)","description":"\u003cp\u003eThe \u003cstrong\u003e400mm 72-tooth TCG panel sizing blade\u003c\/strong\u003e (PS4006072T) is built for clean, chip-free sizing of coated sheet goods — MDF, particleboard, laminate, melamine, and plywood. Its 72 triple-chip (TCG) teeth in SuperMicro-Sheen C-11 sub-micron carbide hold a keen edge on abrasive surfaces, and the 4.4mm kerf on a 3.2mm plate stays rigid through long runs.\u003c\/p\u003e\n\u003cp\u003eThis blade runs a 60mm bore with a 2\/11\/115 pin pattern and a 15° hook to fit Holzma beam saws and other 400mm horizontal panel saws. Need a different bore or pin layout? Any blade can be \u003ca href=\"\/pages\/custom-saw-blade-modification\"\u003emodified to fit\u003c\/a\u003e your machine. Carbide-tipped teeth resharpen many times to keep your cost-per-cut low.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHolzma is a trademark of its respective owner. This is an aftermarket blade made to fit and is not affiliated with or endorsed by the machine manufacturer.\u003c\/em\u003e\u003c\/p\u003e","brand":"Popular Tools","offers":[{"title":"Default Title","offer_id":47188363870347,"sku":"PS4006072T","price":291.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0327\/4837\/2107\/files\/PS3007572T.jpg?v=1781142708"}],"url":"https:\/\/carbidesawblade.com\/collections\/horizontal-panel-saw.oembed?page=2","provider":"Carbide Saw Blade","version":"1.0","type":"link"}