Popular Tools' 10-inch 40-tooth dado set with 5/8" bore — for 10" table saws that use the standard 5/8" arbor. Same proven 40-tooth outside blades and 8-tooth full-body chippers as the industrial DA1040, configured for the smaller arbor used on many contractor-class and cabinet saws.
What's included
- 2 × 10" outside blades — 40 teeth each, matched right-hand and left-hand pair, 20° positive hook, 5/8" bore
- Multiple 8-tooth full-body chippers in 1/8" and 1/16" kerfs for a total stack width up to 13/16"
- Shim set
- Wooden storage case
Why Popular Tools chippers
Popular Tools chippers feature laser-cut bodies that remove nearly half the steel from the chipper plate. Reduced rotational mass means faster spin-up, less vibration on the arbor, easier startup, and quieter operation under load — without compromising carbide tip strength or chipper structural integrity. It's a small detail you'll feel every time the saw comes up to speed.
Specifications
- Diameter: 10"
- Outside teeth: 40
- Chipper teeth: 8 per chipper
- Hook angle: 20° positive
- Bore: 5/8"
- Maximum stack width: 13/16"
- SKU: DA104058
Best for
10" cabinet and contractor-class table saws with 5/8" arbor. Cabinet construction, drawer-slide channels, shelf dadoes, rabbets, tenons, and joinery in plywood, MDF, hardwood, and softwood. The larger 10" diameter gives more cut depth than an 8" set when your saw can accommodate it.
Other configurations
- Same set in 1" bore: DA1040 — for industrial 10" saws
- 8" version for smaller saws: DA840 (5/8" bore)
Custom bore, pinhole, or keyway? Modified in-house.
Popular Tools operates a full machine shop with wire EDM, precision lathes, and mills. They can bore the center hole to a custom arbor size, add pinhole drive patterns, cut keyways, or split blades for specialized mounting.
- Ships in 1-3 business days from the Popular Tools machine shop
- Rush option: $30 per blade for priority handling
- Tight tolerances and minimal runout
Learn more → or call (855) 628-7297 for a quote.
Compatibility
- Minimum 3 HP table saw for full-width cuts in hardwood
- 5/8" arbor with sufficient length for the full dado stack
- ⚠ NOT compatible with SawStop table saws.
Setup & safety
- Outside saws always mount on the outside of the stack, chippers between them
- Never run chippers without both outside saws installed
- Confirm rotation direction on every piece before tightening
- For deep dadoes, make multiple progressively deeper passes
- Make a test cut in scrap to verify width before cutting workpieces
- Follow OSHA guidelines, wear eye protection, keep hands clear of rotating tools
Frequently asked questions
What's the difference between this and the DA1040?
Same set, different bore. DA1040 is 1" bore (industrial arbor). DA104058 is 5/8" bore (standard 10" cabinet/contractor saw). Match to your saw's arbor diameter.
Will my 10" cabinet saw handle this?
Most cabinet saws rated for 10" dado work will. Check your owner's manual for max dado stack width and confirm your arbor length supports the full stack plus the nut.
Will this work with my SawStop?
No. This dado set is not compatible with SawStop table saws.
Can the blades be re-sharpened?
Yes. Standard carbide-tip sharpening.
