Popular Tools' 6-inch stacked dado set for benchtop and smaller table saws. The DA620 is sized for hobbyist shops and contractor-class saws that don't have the horsepower or arbor length for a full 8" stack. Two 20-tooth outside blades with 20° positive hook and 4-tooth chippers cut flat-bottom dadoes and grooves in solid wood, plywood, and MDF.
What's included
- 2 × 6" outside blades — 20 teeth each, matched right-hand and left-hand pair, 20° positive hook
- 4-tooth full-body chippers in multiple kerfs for adjustable stack width
- Shim set
- Wooden storage case
Why Popular Tools chippers
Popular Tools chippers feature laser-cut bodies that remove nearly half the steel from the chipper plate. Reduced rotational mass means faster spin-up, less vibration on the arbor, easier startup, and quieter operation under load — without compromising carbide tip strength or chipper structural integrity. It's a small detail you'll feel every time the saw comes up to speed.
Specifications
- Diameter: 6"
- Outside teeth: 20
- Chipper teeth: 4
- Hook angle: 20° positive
- Bore: 5/8"
- SKU: DA620
Best for
Benchtop table saws, lower-HP contractor saws (1 HP and up), hobbyist shops, and any 5/8" arbor saw that doesn't accept a full 8" dado stack. Ideal for cabinet dadoes, drawer-slide channels, shelf grooves, and joinery in thinner stock.
Custom bore, pinhole, or keyway? Modified in-house.
Popular Tools operates a full machine shop with wire EDM, precision lathes, and mills. They can bore the center hole to a custom arbor size, add pinhole drive patterns, cut keyways, or split blades for specialized mounting.
- Ships in 1-3 business days from the Popular Tools machine shop
- Rush option: $30 per blade for priority handling
- Tight tolerances and minimal runout
Learn more → or call (855) 628-7297 for a quote.
Compatibility
- Minimum 1 HP table saw with dado capability
- 5/8" arbor
- ⚠ NOT compatible with SawStop table saws. SawStop maintains an approved dado list — buy from that list if you own a SawStop.
Setup & safety
- Outside saws always mount on the outside of the stack, chippers between them
- Never run chippers without both outside saws installed
- Confirm rotation direction on every piece before tightening
- Make a test cut in scrap to verify width before cutting workpieces
- Follow OSHA guidelines, wear eye protection, keep hands clear of rotating tools
Frequently asked questions
Will this fit my SawStop?
No. This dado set is not compatible with SawStop table saws.
What's the minimum table saw I need?
1 HP minimum with a 5/8" arbor and dado capability. Most contractor and benchtop saws qualify — check your owner's manual.
Why a 6" set instead of an 8"?
6" dado sets require less horsepower, fit shorter arbors, and are easier on smaller saws. If your saw can handle an 8" set, our 8" options offer more cutting depth.
Can the blades be re-sharpened?
Yes. Standard carbide-tip sharpening — most local sharpening services can handle it.
